Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who lose a key may worry about the cost and inconvenience to replace it. However, there is a solution to avoid these costs by creating your own key fob.
To do this, you'll require a flathead screwdriver. Place the screwdriver flat in the slot located in the middle of the case, and slowly open it.
Cost
Some used cars only have one key, while most SAABs have two keys. In this situation the owner will need to purchase an additional key, and this can be expensive. There are a variety of ways to save money during this process. If you only need to replace the key fob case and not the badge or emergency key you could save money by buying a used case from a dealership. However, you should be aware that these cases don't contain the badge or emergency key and are susceptible to wearing out quickly.
You must also pay for the installation and programming of the TWICE module. These costs can be expensive, especially if you don't have an extra.
It is essential to have two keys in your vehicle. This way, if you lose your only working key you won't end up without any transportation.
It's not as difficult as it seems to add a second Saab 9-3 key. The main issue with this is that the key needs to be connected to your car's computer. This can be accomplished by a dealer, but it might take some time to set up an appointment. You can find all the information you require on the internet to guide you through the procedure.
Installation
Most Saab vehicles built after 1995 come with a special immobilizer system that makes use of keys to control the engine of the car. This system also controls door locks and remote functions for the car. It is crucial to keep a spare to avoid losing your original key or having your vehicle taken. If you lose your primary Saab working key, there are several ways to replace it without spending a fortune on dealer services.
It is necessary to prepare the new keyfob. You can do this by using a flathead screwdriver in order to pry the case open. Just insert the screwdriver in a small slot in the middle of the case. Then gently work it. If you're having trouble, try using different angles. After you've opened the case, you'll be able to remove the electronics and put them into a brand new fob case.
Once you have the replacement fob as well as the key, you can begin the process of programming. You'll have to connect your Tech2 and follow the steps for the NG 9-3 (with or without keys). It is recommended that you make use of a replacement TWICE unit that is already mated to the correct key with transponders. It is possible to find this unit on the internet. However, you should ensure that it is an OEM replacement.
Programming
In general, adding an extra key for a Saab 9-3 requires an instrument called a Tech 2. It also requires programming the vehicle to recognize the new key. This is a much more complex process than just copying a metal key. It must be done by a professional so as to not damage the electronic system of the vehicle. If you're thinking about adding an extra key to your vehicle, it's best to do it as quickly as you can. If you put off it could cost you a lot more in future.
You'll also need to replace either the CIM or TWICE modules. It's a process that requires mail order and is not something you can do through an aftermarket supplier. Based on the car model, the cost can be quite expensive.
There's a solution to the dealer who is charging you top price to replace your car computer. S.A. Locksmith & Security can re-program your Saab computer to prepare it for the new key. This will help you save the cost of a new car computer. This service is quick and inexpensive, and it is simple. It will save you 50percent or more compared to what a dealer will charge you! This is an excellent solution for those who have lost their keys.
Remotes
The Saab 9-3 Viggen was among the most distinctive vehicles to ever wear the Saab badge. It was an Scandinavian front-drive, fighter jet-inspired machine that was incredibly fast and fun to drive. Although a number of other Saab models followed it, they were not as original.
It is crucial to replace your Saab 9-3's key fob immediately after you lose it. Unlike the more common European hot hatchbacks, Saab vehicles come with an immobilizer system that requires a distinct key to start. The replacement process is straightforward if you have an extra key, but it can be costly and lengthy if you don't have an additional key.
You can save money by purchasing a used replacement key fob and then having it programmed by a locksmith in your area. But, be The Keylab about purchasing used keys on eBay or other online retailers. They may not be authentic and you could end up paying more in the long run.
Anyone can remove the electronics and battery of an old key fob by using a small flathead phillips screwdriver. Be sure not to scratch the tiny electronic components within the case. It is also important to be careful not to pour liquids onto the interior of the case because it could cause damage. You should also avoid buying duplicate keys from aftermarket sellers, as they may not have been connected to the CIM on your car.